|
|
|
InsideFinishing Article Archive |
|
Cold Foiling
Diecutting
Foil Stamping/Diecutting on Cylinder Presses
by:
Staff
Question & Answer
February-March,
2010
|
One-Pass Embossing and Diecutting
by:
Metal Magic
Question and Answer
August-September,
2009
|
Braille Standards Soon to Become Commonplace
by:
Staff
Special Report
May-June,
2009
|
Strategies for Optimal Diecutting
by:
Kevin Carey, DieInfo
Question and Answer
February-March,
2009
|
Eliminating Static with Diecutting
by:
Mark Baril, Cut Smart Manufacturing, Inc.
Technology Focus
May-June,
2008
|
Diecutters Rise to the Challenge as Short Runs Proliferate
by:
Ralph Pasquariello
Technology Focus
May-June,
2007
|
Working with In-line Registered Embossing
by:
Jeff Peterson
Question and Answer
May-June,
2007
|
Plastic Sheets: Converting a Different Animal
by:
Jeff Peterson
Technology Focus
February-March,
2007
|
Stripping Tool Design and Fabrication Considerations in Automatic Platen Diecutting
by:
Dan Witucki, Advanced Die Supplies
Technology Focus
May-June,
2005
|
Automated Rule Bending Systems
by:
Robert L. Carter
Technology Focus
May-June,
2004
|
Changing with the Times - Technology Advancement in Die Making
by:
Bruce Byrne, Southeastern Die
Technology Focus
May-June,
2003
|
Guide to Selecting Steel Rule
by:
Mark Batson Baril
Question and Answer
November-December,
2002
|
Diecutter/Diemaker Communication - Success or Failure in Business
by:
Robert A. Larson
Special Focus
May-June,
2002
|
Knowing the Ins and Outs of Used Equipment
by:
Staff
Question and Answer
May-June,
2002
|
"In-Line" Becoming the "In" Thing
by:
Jeff Peterson
Technology Focus
August-September,
2001
|
Should You Have an In-Plant Dieshop? No and Yes
by:
Robert Larson, President of Larson Worldwide, Inc.
Technology Focus
May-June,
2001
|
New Innovations Take Center Stage at FSEA Conference
by:
Staff
Technology Focus
February-March,
2001
|
Diecutting Pre-Makeready: Racing Toward Success
by:
John Maddox, Simonds Notting
Technology Focus
May-June,
2000
|
Capital Equipment - When Should I Buy?
by:
Jeff Peterson
Technology Focus
August-September,
1999
|
Who's Making the Rules?
by:
Mark Batson Baril
Technology Focus
May-June,
1999
|
What is the ANSI B65.5-1996 & How Does it Affect Me?
by:
Robert Weidhaas, Jr. of Preco Industries, Inc.
Question and Answer
November-December,
1998
|
Integrating the Graphic and Diecutting Processes
by:
Kevin B. Carey
Technology Focus
May-June,
1998
|
What type of safety standards are available for graphic finishing operations?
by:
Staff
Question and Answer
May-June,
1996
|
The Development and Use of Embossing in Steel Rule Cutting Dies
by:
March Love, Atlas Die, Inc.
Technology Focus
February-March,
1996
|
What type of system is recommended for storing steel rule dies?
by:
Staff
Question and Answer
November-December,
1995
|
Embossing
Makeready and Set-Up for Large Format
Combination Stamping
by:
Staff
Question & Answer
November/December,
2009
|
One-Pass Embossing and Diecutting
by:
Metal Magic
Question and Answer
August-September,
2009
|
Braille Standards Soon to Become Commonplace
by:
Staff
Special Report
May-June,
2009
|
Now there is Proof–
Foil Can be a Sustainable Choice
by:
Jeff Peterson
Special Report
November-December,
2008
|
Storing and Handling Foil Stamping and Embossing Dies
by:
Question and Answer
August-September,
2007
|
Working with In-line Registered Embossing
by:
Jeff Peterson
Question and Answer
May-June,
2007
|
A Closer Look at CNC Engraving Technology
by:
Staff
Question and Answer
February-March,
2006
|
Self-Leveling Combination Foil Stamping and Embossing Makeready
by:
Jim Kingsby
Technology Focus
February-March,
2006
|
Die Lock-up Holding Tight with the Times
by:
Jeff Peterson
Technology Focus
November-December,
2004
|
A Closer Look into Foil Stamping and Embossing
by:
Jeff Peterson
Special Report
August-September,
2004
|
Foil Stamping Strengthens Brand Identity - It's a Fact!
by:
Elliot Young
Special Report
May-June,
2004
|
Tackling Multiple Pass Registration on a Cylinder
by:
Jim Kingsby
Technology Focus
February-March,
2004
|
Tackling Multiple Pass Registration
by:
Jim Kingsby
Technology Focus
August-September,
2003
|
Safety Issues With Foil Stamping Presses
by:
Staff
Question and Answer
February-March,
2003
|
Knowing the Ins and Outs of Used Equipment
by:
Staff
Question and Answer
May-June,
2002
|
The ‘Ins’ and ‘Outs’ of Digital Artwork: What the Diemaker Needs
by:
Kym Conis
Question and Answer
February-March,
2002
|
"In-Line" Becoming the "In" Thing
by:
Jeff Peterson
Technology Focus
August-September,
2001
|
Decreasing Downtime on Your Foil Stamping Press
by:
Chris Van Pelt
Question and Answer
August-September,
2001
|
Awareness of Potential Hot Stamping Foil Challenges
by:
Jeff Peterson
Question and Answer
February-March,
2001
|
New Innovations Take Center Stage at FSEA Conference
by:
Staff
Technology Focus
February-March,
2001
|
Die Lockup Methods
by:
Jeff Peterson
Question and Answer
February-March,
2000
|
Embossing Techniques
by:
Jeff Peterson
Question and Answer
November-December,
1999
|
Capital Equipment - When Should I Buy?
by:
Jeff Peterson
Technology Focus
August-September,
1999
|
Making That Engraving Choice
by:
Jeff Peterson
Technology Focus
February-March,
1999
|
Application Equipment at the Dawn of a High-Speed Age
by:
Jeff Peterson
Technology Focus
November-December,
1998
|
What is the ANSI B65.5-1996 & How Does it Affect Me?
by:
Robert Weidhaas, Jr. of Preco Industries, Inc.
Question and Answer
November-December,
1998
|
Saving Time on Set-up
by:
Carla Davenport
Technology Focus
August-September,
1998
|
What type of safety standards are available for graphic finishing operations?
by:
Staff
Question and Answer
May-June,
1996
|
The Development and Use of Embossing in Steel Rule Cutting Dies
by:
March Love, Atlas Die, Inc.
Technology Focus
February-March,
1996
|
Photoengraving options for today's graphic finishers
by:
Staff
Technology Focus
August-September,
1995
|
How do I get the most out of my multi-level embossing?
by:
Staff
Question and Answer
May-June,
1995
|
Film Laminating
Foil Fusing
Foil Stamping
Foil Stamping/Diecutting on Cylinder Presses
by:
Staff
Question & Answer
February-March,
2010
|
Makeready and Set-Up for Large Format
Combination Stamping
by:
Staff
Question & Answer
November/December,
2009
|
New Processes Provide Decorative Choices
by:
Jeff Peterson
Technology Focus
February-March,
2009
|
Now there is Proof–
Foil Can be a Sustainable Choice
by:
Jeff Peterson
Special Report
November-December,
2008
|
Working with Difficult-to-Stamp Surfaces
by:
Staff
Question and Answer
August-September,
2008
|
Registered Holograms for Short-Run Work
by:
Jeff Peterson
Technology Focus
November-December,
2007
|
Storing and Handling Foil Stamping and Embossing Dies
by:
Question and Answer
August-September,
2007
|
Plastic Sheets: Converting a Different Animal
by:
Jeff Peterson
Technology Focus
February-March,
2007
|
A Closer Look at CNC Engraving Technology
by:
Staff
Question and Answer
February-March,
2006
|
Self-Leveling Combination Foil Stamping and Embossing Makeready
by:
Jim Kingsby
Technology Focus
February-March,
2006
|
Die Lock-up Holding Tight with the Times
by:
Jeff Peterson
Technology Focus
November-December,
2004
|
A Closer Look into Foil Stamping and Embossing
by:
Jeff Peterson
Special Report
August-September,
2004
|
Foil Stamping Strengthens Brand Identity - It's a Fact!
by:
Elliot Young
Special Report
May-June,
2004
|
Tackling Multiple Pass Registration on a Cylinder
by:
Jim Kingsby
Technology Focus
February-March,
2004
|
Tackling Multiple Pass Registration
by:
Jim Kingsby
Technology Focus
August-September,
2003
|
Safety Issues With Foil Stamping Presses
by:
Staff
Question and Answer
February-March,
2003
|
Knowing the Ins and Outs of Used Equipment
by:
Staff
Question and Answer
May-June,
2002
|
The ‘Ins’ and ‘Outs’ of Digital Artwork: What the Diemaker Needs
by:
Kym Conis
Question and Answer
February-March,
2002
|
"In-Line" Becoming the "In" Thing
by:
Jeff Peterson
Technology Focus
August-September,
2001
|
Decreasing Downtime on Your Foil Stamping Press
by:
Chris Van Pelt
Question and Answer
August-September,
2001
|
Awareness of Potential Hot Stamping Foil Challenges
by:
Jeff Peterson
Question and Answer
February-March,
2001
|
New Innovations Take Center Stage at FSEA Conference
by:
Staff
Technology Focus
February-March,
2001
|
Die Lockup Methods
by:
Jeff Peterson
Question and Answer
February-March,
2000
|
Foil vs Foilboard
by:
Kym Conis
Technology Focus
February-March,
2000
|
Capital Equipment - When Should I Buy?
by:
Jeff Peterson
Technology Focus
August-September,
1999
|
Preventing Air Entrapment and Gassing with Foil
by:
Paul Miller
Question and Answer
May-June,
1999
|
Foil Stamping Image Holograms
by:
Christopher Van Pelt
Question and Answer
February-March,
1999
|
Making That Engraving Choice
by:
Jeff Peterson
Technology Focus
February-March,
1999
|
Application Equipment at the Dawn of a High-Speed Age
by:
Jeff Peterson
Technology Focus
November-December,
1998
|
What is the ANSI B65.5-1996 & How Does it Affect Me?
by:
Robert Weidhaas, Jr. of Preco Industries, Inc.
Question and Answer
November-December,
1998
|
Saving Time on Set-up
by:
Carla Davenport
Technology Focus
August-September,
1998
|
Meeting the Challenge of UV Coatings & Hot Stamping Foil
by:
Staff
Question and Answer
May-June,
1998
|
What type of safety standards are available for graphic finishing operations?
by:
Staff
Question and Answer
May-June,
1996
|
What are my concerns when overprinting foil?
by:
Staff
Question and Answer
February-March,
1996
|
Recovery options for hot stamping foil scrap
by:
Staff
Technology Focus
November-December,
1995
|
Photoengraving options for today's graphic finishers
by:
Staff
Technology Focus
August-September,
1995
|
How can I stamp a large solid and fine type together in the same pass?
by:
Staff
Question and Answer
February-March,
1995
|
Folding/Gluing
Modern Folding and Gluing Technologies Take Their Cue from Innovative Carton Design
by:
Dan Maurer, Heidelberg USA, and
Beatrice Schmitt, Heidelberger Druckmachinen AG
Technology Focus
February-March,
2010
|
Ancillary Equipment Key to Folding/Gluing Success
by:
Jeff Peterson
Technology Feature
November-December,
2008
|
Don't Come Unstuck Over Folding and Gluing
by:
Uvan Magni, Technical Product Manager, Bobst Group North America
Special Focus
August-September,
2007
|
Ancillary Systems for Folding-Gluing Equipment Continue to Change
by:
Staff
Question and Answer
August-September,
2006
|
Trends and Styles in Folding and Gluing
by:
Alan Thompson
Technology Focus
August-September,
2005
|
Working with Pocket Folder Challenges on a Folder/Gluer
by:
Staff
Question and Answer
August-September,
2004
|
What to Look for When Making a New Folder/Gluer Purchase
by:
Staff
Question and Answer
August-September,
2003
|
Getting Your Folder/Gluer Organized
by:
Staff
Technology Focus
August-September,
2002
|
Automation and Computerization with Fold/Gluing Equipment
by:
Jeff Peterson
Question and Answer
May-June,
2001
|
Folding/Gluing Folding Cartons - Those Unforeseen Challenges
by:
staff
Question and Answer
August-September,
2000
|
Challenges with Folding/Gluing CD Wallets
by:
Jeff Peterson
Question and Answer
August-September,
1999
|
What should a buyer look for when considering the purchase of folding/gluing equipment?
by:
Staff
Question and Answer
August-September,
1996
|
Green Initiatives
Holograms
Laser Cutting
Management Trends
The Top 10 Traps in OSHA Compliance
by:
Renée Varella
Management Trends
November-December,
2008
|
Pathways to Green: An Introduction for the Print Finishing Industry
by:
Reneé Varella
Special Report
August-September,
2008
|
OSHA Publications and Posters
by:
Staff
Safety Forum
May-June,
2008
|
A Lifetime of Customers, Generations of Friends - FSEA Lifetime Achievement Award Recipient: Fred Isler
by:
Reneé Varella
Lifetime Achievement Award
February-March,
2008
|
Leadership in Paper and the Environment
by:
Derek Smith
Special Report
February-March,
2008
|
Database Marketing is an Art Form
by:
BMA Knowledge Base, Business Marketing Association
Management Trends
February-March,
2007
|
Pioneering Territories Unknown - FSEA Lifetime Achievement Award Recipient: John Tinnon
by:
Kym Conis
Lifetime Achievement Award
February-March,
2007
|
Improve Productivity on the Shop Floor (Part 2)
by:
Raymond J. Prince, Senior Technical Consultant, PIA/GATF
Special Report
November-December,
2006
|
Workplace Safety – Is It a Benefit or a Curse?
by:
Bill Effron, President, Alco Print Finishers
Management Trends
November/December,
2006
|
Improve Productivity on the Shop Floor (Part 1)
by:
Raymond J. Prince, Senior Technical Consultant, PIA/GATF
Technology Focus
August-September,
2006
|
It's Time to Fine Tune Your Business Insurance
by:
Provided by Sentry Insurance
Management Trends
May-June,
2006
|
A Guiding Light - 2006 FSEA Lifetime Achievement Award Recipient - Tom Cullen
by:
Kym Conis
Lifetime Achievement Award
February-March,
2006
|
InsideFinishing's 10th Anniversary Celebration - A Snapshot View
by:
Kym Conis
Special Report
November-December,
2005
|
Managers: Rid Your Sales Team of Parasites
by:
Landy Chase
Management Trends
November-December,
2005
|
Manage the Cost of Quoting
by:
Dave Fellman
Management Trends
May-June,
2005
|
Faith in Numbers - The Changing Demographics of the Printing Industry Reflect its Many Challenges and Opportunities
by:
Richard Romano
Special Report
November-December,
2005
|
Foil Stamping Strengthens Brand Identity - It's a Fact!
by:
Elliot Young
Special Report
May-June,
2004
|
A Man of Vision - Glenn Hutchison
by:
Staff
Lifetime Achievement Award
February-March,
2004
|
New Tax Laws Provide Added Incentive for Capital Equipment Purchases
by:
Staff
Special Focus
November-December,
2003
|
Sometimes the Easiest Way to Increase Sales and your Bottom Line is RIght Under your Nose
by:
Mark Porter
Special Focus
May-June,
2003
|
Identifying Useful Information for Long-term Planning
by:
David S. Hutchison
Special Focus
February-March,
2003
|
A Rose by Any Other Name
by:
Oliver Moesgen
Special Focus
November-December,
2002
|
Foil vs Foilboard
by:
Kym Conis
Technology Focus
February-March,
2000
|
Capital Equipment - When Should I Buy?
by:
Jeff Peterson
Technology Focus
August-September,
1999
|
What is the ANSI B65.5-1996 & How Does it Affect Me?
by:
Robert Weidhaas, Jr. of Preco Industries, Inc.
Question and Answer
November-December,
1998
|
What type of safety standards are available for graphic finishing operations?
by:
Staff
Question and Answer
May-June,
1996
|
How do I begin a maintenance program for my stamping and die cutting equipment?
by:
Staff
Question and Answer
August-September,
1995
|
Mounting/Laminating
UV Coating
Specialty UV Coatings:
The “Finishing Touch” for
Off-Line Finishing Projects
by:
Kris Getty, Henkel Corporation
Technology Feature
November/December,
2009
|
Guidelines for UV Coating Applications
by:
Kenneth Corman, Westlam
Technology Focus
February-March,
2008
|
UV Coatings and Inks
by:
Staff
Question and Answer
May-June,
2006
|
Why Do You Need a Radiometer for UV Coating?
by:
Staff
Special Focus
August-September,
2005
|
Safety and Handling of UV Coatings
by:
Staff
Question and Answer
August-September,
2002
|
Is UV-Coating the Right Choice for You?
by:
Jeff Peterson
Question and Answer
May-June,
2000
|
Meeting the Challenge of UV Coatings & Hot Stamping Foil
by:
Staff
Question and Answer
May-June,
1998
|
What Sets UV, Aqueous and Laminates Apart?
by:
Staff
Technology Focus
May-June,
1996
|
|
|
|
|
